Home      Log In      Contacts      FAQs      INSTICC Portal
 

Industrial Track

The Industrial Track is an excellent vehicle for companies to advertise and promote their innovative products and services, connect with other companies and engage in discussions about research and development initiatives.

The Industrial Track to be held in Prague is focused on Model-Driven Engineering and Software Development.

This event is held in parallel with a related conference, namely MODELSWARD, attracting more than 1100 researchers from more than 60 countries in all continents, creating opportunities for knowledge and technology sharing, and facilitating future collaboration networks involving industrial project partners and interested conference delegates.

Furthermore, a parallel satellite event is being organized to attract European Projects and to stimulate discussions around the new European Framework for supporting R&D, Horizon 2020, which will include the participation of representatives from the European Commission.

The Industrial Track will include the following forms of participation:

  • Lease of a booth (2x2m with a table and chair) for distributing information or for demonstration purposes, which will be free of charge with the registration at the conference of at least one representative of the Company
  • Poster Display
  • Presentation/Demonstration of project results either orally or in other formats
  • Organization of a special session, workshop or a panel/round-table, focused on the company projects and topics of research
  • Tutorial
  • Company Presentation

Industrial Track proposals are accepted until:

October 17, 2018


If you wish to receive more information about how to participate in the Industrial Track please kindly fill out and submit this Expression of Interest form.



INDUSTRIAL TRACK PROGRAM COMMITTEE

Silvia Abrahão, Universitat Politecnica de Valencia, Spain
Hamideh Afsarmanesh, University of Amsterdam, Netherlands
Ludovic Apvrille, LTCI, Télécom ParisTech, Université Paris-Saclay, France
Keijiro Araki, Kyushu University, Japan
Ethem Arkin, Aselsan, Turkey
Marco Autili, University of L'Aquila, Italy
Elarbi Badidi, United Arab Emirates University, United Arab Emirates
Omar Badreddin, University of Texas El Paso, United States
Mira Balaban, Ben-Gurion University of the Negev, Israel
Martin Becker, Fraunhofer IESE, Germany
Frederick BENABEN, Ecole Nationale Supérieure des Mines d’Albi-Carmaux, France
Nelly Bencomo, INRIA Paris-Rocquencourt, France
Lorenzo Bettini, Università di Firenze, Italy
Paolo Bocciarelli, University of Rome Tor Vergata, Italy
Marco Brambilla, Politecnico di Milano, Italy
Matthias Brun, ESEO Group, France
Philipp Brune, University of Applied Sciences Neu-Ulm, Germany
Christian Bunse, University of Applied Sciences Stralsund, Germany
Renata Carvalho, Eindhoven University of Technology (TU/e), Netherlands
Rui César das Neves, Polytechnic Institute of Setúbal, Portugal
Hassan Charaf, BME, Hungary
Olena Chebanyuk, National Aviation University, Ukraine
Yuting Chen, Shanghai Jiaotong University, China
Dickson Chiu, The University of Hong Kong, Hong Kong
Nebut Clémentine, LIRMM, Université de Montpellier, France
Andrea D'Ambrogio, Università di Roma "Tor Vergata", Italy
Guglielmo De Angelis, CNR - IASI, Italy
Sergio de Cesare, University of Westminster, United Kingdom
Leonidas Deligiannidis, Wentworth Institute of Technology, United States
Birgit Demuth, TU Dresden, Germany
Giovanni Denaro, University of Milano-Bicocca, Italy
Enrico Denti, Alma Mater Studiorum - Università di Bologna, Italy
Sophie Ebersold, IRIT, France
Holger Eichelberger, Universität Hildesheim, Germany
Angelina Espinoza, Universidad Autónoma Metropolitana, Iztapalapa (UAM-I), Spain
Vladimir Estivill-Castro, Griffith University, Australia
Anne Etien, CRIStAL, University Lille 1 - Inria - Cnrs, France
João Faria, FEUP - Faculty of Engineering of the University of Porto, Portugal
Stephan Flake, Redknee Germany OS GmbH, Germany
Piero Fraternali, Politecnico di Milano, Italy
Jicheng Fu, University of Central Oklahoma, United States
Kurt Geihs, University of Kassel, Germany
Paola Giannini, University of Piemonte Orientale, Italy
Fabian Gilson, University of Canterbury, New Zealand
Carmine Gravino, University of Salerno, Italy
Christiane Gresse von Wangenheim, UFSC - Federal University of Santa Catarina, Brazil
Klaus Havelund, Nasa/Jet Propulsion Laboratory, United States
Rene Hexel, Griffith University, Australia
Jose R. Hilera, University of Alcala, Spain
Pavel Hruby, DXC Technology, Denmark
Emilio Insfran, Universitat Politècnica de València, Spain
Stefan Jablonski, University of Bayreuth, Germany
Slinger Jansen, Utrecht University, Netherlands
Maria Jose Escalona, University of Seville, Spain
Teemu Kanstren, VTT, Finland
Jochen Kuester, University of Applied Sciences in Bielefeld, Germany
Uirá Kulesza, Federal University of Rio Grande do Norte (UFRN), Brazil
Rahul Kumar, Jet Propulsion Laboratory, United States
Anna-Lena Lamprecht, Utrecht University, Netherlands
Kun Chang Lee, Sungkyunkwan University, Korea, Republic of
Dongxi Liu, CSIRO, Australia
Francesca Lonetti, National Research Council (CNR) Pisa, Italy
Patricia López Martínez, University of Cantabria, Spain
David Lorenz, Open University, Israel
Der-Chyuan Lou, Chang Gung University, Taiwan
Frederic Mallet, Universite Nice Sophia Antipolis, France
Juan Manuel Gonzalez Calleros, Universidad Autónoma de Puebla, Mexico
Steve McKeever, Uppsala University, Sweden
Dragan Milicev, University of Belgrade, Faculty of Electrical Engineering, Serbia
Dugki Min, Konkuk University, Korea, Republic of
Rodrigo Monteiro, Fluminense Federal University, Brazil
Aida Omerovic, SINTEF, Norway
Achilleas P. Achilleos, University of Cyprus, Cyprus
Vera Pantelic, McMaster University, Canada
Alexander Petrenko, ISPRAS, Russian Federation
Elke Pulvermueller, University of Osnabrueck, Germany
Ansgar Radermacher, CEA, France
Iris Reinhartz-Berger, University of Haifa, Israel
Wolfgang Reisig, Humboldt-Universität zu Berlin, Germany
Colette Rolland, Université De Paris1 Panthèon Sorbonne, France
Jose Raul Romero, University of Cordoba, Spain
Gustavo Rossi, Lifia, Argentina
Francesca Saglietti, University of Erlangen-Nuremberg, Germany
John Slaby, Raytheon, United States
Pnina Soffer, University of Haifa, Israel
Richard Soley, Object Management Group, Inc., United States
Hui Song, SINTEF, Norway
Jean-Sébastier Sottet, Luxembourg Institute for Science and Technology, Luxembourg
Ioannis Stamelos, Aristotle University of Thessaloniki, Greece
Alin Stefanescu, University of Bucharest, Romania
Arnon Sturm, Ben-gurion University of the Negev, Israel
Hiroki Suguri, Miyagi University, Japan
Layne T. Watson, Virginia Polytechnic Institute & State University, United States
Massimo Tivoli, University of L'Aquila, Italy
Naoyasu Ubayashi, Kyushu University, Japan
Andreas Ulrich, Siemens AG, Germany
Jan Martijn van der Werf, Universiteit Utrecht, Netherlands
Gianluigi Viscusi, EPFL Lausanne, Switzerland
Hao Wu, National University of Ireland, Maynooth, Ireland
Husnu Yenigun, Sabanci University, Turkey
Chunying Zhao, Western Illinois University, United States
Kamil Zyla, Lublin University of Technology, Poland

(list not yet complete)

PAPER SUBMISSION

Prospective authors are invited to submit papers in any of the tracks listed above. Instructions for preparing the manuscript (in Word and Latex formats) are available at: Paper Templates
Please also check the Guidelines.
Papers should be submitted electronically via the web-based submission system at: http://www.insticc.org/Primoris

PUBLICATIONS

After thorough reviewing by the Industrial Track advisory board, all accepted papers will be published in a special section of the conference proceedings book - under an ISBN reference and on CD-ROM support - and submitted for indexation by Thomson Reuters Conference Proceedings Citation Index (CPCI/ISI), INSPEC, DBLP, EI (Elsevier Engineering Village Index) and Scopus. SCITEPRESS is a member of CrossRef (http://www.crossref.org/) and every paper is given a DOI (Digital Object Identifier).

All papers presented at the conference venue will be available at the SCITEPRESS Digital Library

SECRETARIAT CONTACTS

MODELSWARD Industrial Track Secretariat

e-mail: modelsward.secretariat@insticc.org

footer